International Electrotechnical Commission

Propane AC could help avoid global temperature rises


A report printed at the Proceedings of the Countrywide Academy of Sciences (PNAS) has highlighted the emissions that could be prevented by switching to propane as a refrigerant in break up-process air conditioners. The research team estimates that such a transition could avoid a .09°C raise in world-wide temperature by the close of the century.

World wide possibility

The report notes that split ACs are at this time the most applied equipment for space cooling throughout the world, and that in 2016, room cooling accounted for all-around 10 for every cent of world wide electrical energy need. Primarily based on recent trends, need from air conditioners is envisioned to triple by 2050 and the inventory of ACs would boost from about .9 billion in 2017 to above 3.7 billion in 2050.

Most of these units have HFCs, which are getting phased down globally.

“The stage-down of refrigerants with large world warming likely (GWP) prescribed by the Kigali Modification to the Montreal Protocol has triggered a main hard work to come across fewer harmful different refrigerants,” states Pallav Purohit, guide researcher on the task and senior exploration scholar in the Air pollution Management Exploration Group of the IIASA Energy, Climate, and Ecosystem Software.

“R32 is at this time the most widespread refrigerant to substitute R410A in break up ACs,” claims Purohit. “The GWP of R32 is about 1 3rd that of R410A, but however considerably increased than that of a rising number of non-fluorinated choices like propane with a GWP of <1, which have recently become commercially available for split ACs.

“While analysing the consistency of Kigali ambitions with the 1.5°C Paris Agreement goal, we have realised that propane-based residential air conditioners (ACs) are being manufactured in India and in China with cooling capacities up to 7kW. In 2020, the actual globally installed base was over one million units, mainly in India and China.

“Therefore, in this study, we show that a switch to propane as an energy-efficient and commercially available low-GWP alternative in split ACs, could avoid 0.09°C (0.06–0.12°C) increase in global temperature by the end of the century. This is significantly more than the 0.03°C (0.02–0.05°C) avoided warming from a complete switch to R32 in split ACs.”

Focus on direct emissions

The study focussed on the environmental impact of direct emissions (refrigerant leakage).

But Purohit says that in terms of indirect emissions (energy use), split ACs using propane perform similarly to those using R32, and are more efficient than currently widespread appliances using R410A and R22.

He points to another study by an International Energy Agency (IEA)-sponsored program that found domestic unitary air conditioners using propane refrigerant have a lower life-cycle climate performance (LCCP) than comparable units running with R410A, R32, and other alternatives in 11 cities around the world.

The research team has previously published a study that takes into account both direct and indirect emissions. This indicated that if technical energy efficiency improvements are fully implemented, the resulting electricity savings could exceed 20 per cent of future global electricity consumption.

“The combined effect of HFC phase-down, energy efficiency improvement of the stationary cooling technologies, and future changes in the electricity generation fuel mix would prevent 411–631Gt CO2 of GHG emissions between 2018 and 2100, thereby making a significant contribution towards keeping the global temperature rise below 2°C,” says Purohit.

Barriers to uptake

Although there have now been many calls for greater uptake of hydrocarbons in split systems, the major manufacturers are yet to show signs of moving. Purohit believes this is largely due to safety standards regarding the use of flammable refrigerants.

“Therefore, countries are encouraged to support the adaptation according to technological improvements of these safety standards to allow larger charge sizes while including guidance on safe application,” he says.

He highlights the recent decision by the International Electrotechnical Commission (IEC) to approve an international standard on safety requirements for electric heat pumps, air conditioners and dehumidifiers for domestic use.

“This new standard allows for higher charge limits for hydrocarbons such as propane (R290) and other flammable refrigerants in domestic technology,” says Purohit, “which in turn means potentially massive reductions in the emission of climate-damaging refrigerant gases.”

The study considers the capacity of split ACs (<7kW) that will require less than the higher load of flammable refrigerants allowed by the IEC.

To read the report, click here.



Source link

New explosive gas atmospheres standard on the way


Field is getting ready for a new version of AS/NZS 60079.10.1:2009, Classification of places – Explosive gasoline atmospheres, because of to look afterwards this yr.

AS/NZS 60079.10.1:2009 is a modified version of the IEC 60079-10-1 regular, released in 2008. Given that then there have been two updates to the IEC common, in 2015 and 2020. The Specifications Australia committee has thought of the IEC 2020 model, and it is anticipated to be printed, with modifications, as an Australian regular in late 2022.

Ben Adamson, F.AIRAH, who serves on committees with Benchmarks Australia and the Worldwide Electrotechnical Commission, states that the new variation of the regular will be of distinct curiosity in Australia’s transforming HVAC&R landscape.

“In the past, this conventional has experienced small relevance to Australian HVAC practitioners, as flammable refrigerants have seldom been made use of in HVAC,” suggests Adamson. “The R fraternity have some desire in 60079.10.1 because of to the use of ammonia, which is minimal flammability (class B2L) but the Australian annexes in AS/NZS 60079.10.1:2009 incorporate precise provisions relating to ammonia, and the ammonia earth is familiar with these. Other flammables, these kinds of as propane, have been made use of generally in large units for the oil, fuel and petrochemical industries, wherever the use of flammables is common and has been practiced properly for a lot of many years.”

But, as Adamson factors out, flammable (A2L) HFOs and a flammable HFCs these types of as R32 are significantly getting used.

“Small systems with restricted costs of A2Ls (commonly <1kg) are covered under specific appliance standards,” he says, “but we are now seeing package chillers containing 100kg or more of R1234ze, R1234yf or R32, all A2Ls.”

Adamson notes that the A2L classification is not ecognized in Australia under flammable gas standards, and clause 5.14.1.1, in AS/NZS 5149.3:2016 states:

Machinery rooms with group A2L, A2, B2L, B2, A3 and B3 refrigerants, where it is possible for the concentration to exceed the practical limit or RCL (20 % of LFL), or for a flammable atmosphere to exist at any location, shall be assessed for hazardous areas in accordance with AS/NZS 60079.10.1.

“Any installation of a large package chiller for an HVAC application must conduct an appropriate design review and risk assessment in accordance with AS/NZS 60079.10.1,” says Adamson. “This will be a new experience for most HVAC practitioners in Australia.”

Adamson says there are a number of things practitioners can do to prepare.

“If considering an A2L installation, the designer and installer should read the current AS/NZS60079.10.1:2009, AS/NZS 5149.3:2016 and the latest IEC 60079.10.1(2020) and watch this space for more news later this year,” he says.

“If someone has already installed an A2L chiller without considering the flammability implications, that installation may be illegal or dangerous, or both. That carries major implications for insurance and liability, and should be reviewed as a matter of urgency.

“Finally, ensure that the person undertaking and signing off risk assessments is competent in the area of flammable gas atmospheres.”

Adamson recently presented on this topic at Refrigeration 2022, and is due to provide an update at the Future of HVAC 2022.



Source link

Hydrocarbons the future for residential AC?


Sector stakeholders have applauded a revised Worldwide Electrotechnical Fee (IEC) basic safety typical that will allow bigger prices of flammable refrigerants in family appliances such as air conditioners, heat pumps and dehumidifiers. In unique, it could open up the way for greater use of hydrocarbons in household air conditioning.

Conventional IEC 60335-2-40 offers with the protection of electrical warmth pumps, together with air conditioners, sanitary incredibly hot drinking water heat pumps, and dehumidifiers incorporating motor-compressors and hydronic supporter coil models. The standard has been the issue of substantially consideration, as it is noticed as a key enabler for greater uptake of very low-GWP flammable refrigerants these kinds of as hydrocarbons.

The new version of the normal will allow the use of greater expenses if extra mitigation actions these types of as refrigerant sensors and circulation followers are in spot. It also introduces a new approach for calculating most cost by getting into consideration style and design characteristics that will stop the escape of refrigerant.

Beneath the revised standard, a common break up-program air conditioner could now keep up to 988g of R290 (propane).

“The new version of IEC 60335-2-40 will enable R290 to be applied in several AC and heat-pump techniques which were earlier blocked from using this refrigerant by the outdated edition,” suggests Asbjørn Vonsild, the convenor of the IEC operating team.

“This will permit a thousand-fold reduction in immediate weather emissions in comparison with devices employing R410A.”

Propane has a GWP of 3, as opposed to R410A’s GWP of 2,088, and R32’s GWP of 675.

The Environmental Investigation Agency (EIA), which has extended campaigned for greater uptake of hydrocarbons as an different to artificial refrigerants, has hailed the revised common as a significant stage to local weather-welcoming cooling.

“After urging governments and field to address this difficulty for quite a few many years, EIA is delighted to see this essential milestone achieved on the pathway to internet-zero and clean up sustainable cooling,” says EIA Climate Campaign Leader Clare Perry.

The EIA has also flagged fears all around artificial possibilities to HFCs that, whilst obtaining a low GWP, may possibly deliver damaging substances when they break down.

“The world is phasing out local weather-harming hydrofluorocarbons (HFCs) less than the Kigali Modification to the Montreal Protocol and we urgently need to have to adopt potential-proof, price-helpful alternatives such as propane so as not tumble into the trap of buying into one more F-gasoline business ‘solution’ these types of as hydrofluoroolefins (HFOs), which are laden with environmental and human health and fitness problems,” states Perry.

“With this new common, we hope the European Parliament and EU member states to recognise that HFCs are no lengthier necessary for a big portion of the air-con and warmth pump marketplace and to improve the not too long ago proposed EU F-Gas Regulation accordingly.”

The typical is envisioned to be posted on June 24. Soon after that, it ought to be adopted into regional and nationwide protection requirements and constructing codes to take comprehensive influence.



Resource url